HAEGER CM-10B.010A, Инструкция пользователя

Страница: 6 / 40

English
4 Instructions for use
Overview of the components
1. Brew basket with grinder and filter 2. Control panel
3. Glass carafe 4. Top cover
5. Water tank 6. Main body
7. Grinder blade 8. Coffee container
9. Permanent filter
Before First Use
•
This appliance is designed to brew drip coffee by the effect of hot water
passing through ground coffee.
•
Completely remove all the transport and packaging items inside or outside
the appliance. Check that neither the appliance nor any of its parts is
damaged.
•
Thoroughly wash the permanent filter and its holder and the jar in warm
water with a small amount of neutral kitchen detergent. Rinse under clean
running water and dry well.
•
Wipe the coffee maker with a soft sponge lightly dipped in warm water.
Then wipe with a dry wiping cloth.
•
Put the appliance on a flat and stable surface.
•
Put the plug in an earthed wall socket.
•
Open the top cover and fill the water tank with fresh, cold water to the
maximum indication and put the jug in place.
Setting the time
•
Program the time by pressing “ Prog ” button one time, the LCD displays
“ CLOCK ” at the top right corner.
•
Set the current time by pressing “ HR ” and “ MIN ” button.
•
Press the “ Prog ” button, the LCD displays “ TIMER ” on the top left corner,
then press again the “ Prog ” button to finish.
Note: The clock of coffee maker uses a 24-hours system. The coffee maker
can also be operated without the time being set, however, if, wish to use
the automatic start function, it is important to set the time.