HAEGER 618 MSPe, Руководство по эксплуатации

Страница: 53 / 92

49
Single Station Settings (Continued)
8. Parts Completed: This feature functions as a batch counter; it keeps track of the number of parts
completed within a program. This value can be changed by the operator at any time. This value can
be increased or decreased by touching the + or – symbols on either side of the value or by touching
the value box and typing in a new value.
9. Set up TPS: This button is selected to set the Tooling Protection System. (For more information, see
page 46).
10. Auto Run/Off: The Auto Run button allows for the operator to choose to operate the machine in a
manual counting mode or an automatic counting mode in order to keep track of the number of parts
completed.
11. Run Mode/Set up Mode: This button allows for the operator to run the machine for insertion
purposes. By touching the button, the machine will then go into what is called the Setup Mode. This
allows the operator to set up and inspect his insertion. The ram will now come down slowly until the
insertion is made and the operator has to depress the up side of the foot pedal to move the ram back
up to its home position.
12. Manual/ABFT/Shuttle: This button allows the operator to choose between the three different types
of tools to be used for each station.
13. Eject: This button allows the operator to manually eject a fastener from the MAS. *Note; the eject
button is only available for the ABFT and the Shuttle tooling. For manual tooling, it is greyed out.
14. Conductive/Non-Conductive: This button allows the operator to select the material type. Once
selected, it places the machine in the correct mode for the safety of the operator.
15. Admin: Selecting the Admin button will take the operator to the Administration screen.