6
Safety Instructions
Before using the equipment, assure that
•
the tool can be pushed far enough into the
chuck (Test this with a dipstick and clean if
necessary.)
•
the inserted tool sits properly in the chuck
and will not cant/jam while clamping it,
•
the tool is approved for using it at the max
speed (see manufacturer
’
s instructions) or
only use the speed required by the instru-
ment,
•
the tool is absolutely dry.
When changing the filter, it is advisable to wear
a face mask conforming to EN 14683 type IIR
or EN 149 FFP 2.
For safety reasons, do not change the tool
while the motor is running.
Switch off the unit immediately if
•
the bur comes off during the treatment itself.
•
the motor blocks during the treatment.
While doing any foot care, only operate the unit
with the suction turned on.
Only use the suction function if you have in-
stalled the suction filter. Check this filter every
