17
Application
Clamping the Bur/Tool
Change the bur/tool only when the
motor is turned off. Insert the bur
until it stops. The handpiece is
equipped with a chuck, which can
hold all burs with a diameter of 2.35
mm (this is the diameter usually
used for tools in podiatry).
For security reasons, only
change the tool if the
handpiece is turned off.
Adjusting the Speed
Hold the handpiece (incl. tool) in
your hand or store it in the hand-
piece holder attached to the side of
the control unit. Switch on the unit
with button (9). Now you can set the
speed with buttons (3) and (4).
Choose the direction of rotation with
button (6).
When the device is brought
out of standby mode it will
run with the rotation speed
and suction power used last. Take
care to not start the mill at an overly
high rotation speed. Select the re-
quired rotation speed before chang-
ing the milling tool.
Foot Switch
Connecting with control unit
Only use the original hadewe foot
switch (art. 0970) to avoid damag-
es. Insert the plug of the foot switch
into the socket (10) with this symbol
.
Foot switch function
If you press the foot switch, you will
switch on/off the complete control
unit.
