5
Safety Instructions
thorized service center.
Prevent your hair from wrapping itself around
moving parts. If applicable, wear a hair net.
When working with materials, which might
create dust or moisture, use a drilling unit with
suction or spray technique. Wear a nose and
mouth protection. Always follow the safety
instructions, provided by the manufacturer of
the materials being formed and used.
For safety reasons you must always wear dis-
posable gloves and protective glasses when
operating this unit. In addition, a face mask
conforming to EN 14683 type IIR or EN 149
FFP 2 must also be worn.
Ensure that the patient
’s foot and the
handpiece are held firmly in place during the
operation. To prevend injury, work with
extreme caution on the foot of the patient, and
use only light pressure.
To ensure that the bur/tool sits firmly in the
chuck, do not work with tools which:
•
have an oily shaft,
•
are worn,
•
are bent.
Before using the equipment, assure that
•
the tool can be pushed far enough into the
