5
Safety Instructions
Prevent any liquids from entering into the control
unit, since this could damage the electronic
elements. Clean the outside of the box only with
a damped cloth. Make sure, that you have
unplugged the unit before.
Only when pulling the mains cable, you can
ensure that the device will be completely
disconnected from mains. Check the mains
cable regularly for damages and in case of
such, have it changed or repaired by an
authorized service center.
Prevent your hair from wrapping itself around
moving parts. If applicable, wear a hair net.
When working with materials, which might
create dust or moisture, use a drilling unit with
suction or spray technique. Wear a nose and
mouth protection. Always follow the safety
instructions, provided by the manufacturer of the
materials being formed and used.
For safety reasons, you must always wear
disposable gloves and protective glasses when
operating this unit. In addition, a face mask
conforming to EN 14683 type IIR or EN 149 FFP
2 must also be worn.
