7
Safety Instructions
Empty the unit if it is not in use for a longer
period of time, e.g. before vacations. Clean out
the tank. Set the spray function on maximum.
Now start the spray function, and the water will
spray for approx. 3 min. The fluid will be blown
out of the complete spray system and
handpiece.
To ensure that the bur/tool sits firmly in the
chuck, do not work with tools which
•
have an oily shaft.
•
are worn.
•
are bent.
Before using the equipment, assure that
•
the tool can be pushed far enough into the
chuck (test this with a dipstick and clean if
necessary),
•
the inserted tool sits properly in the chuck
and will not cant/jam while clamping it,
•
the tool is approved for using it at the max
speed (see manu
facturer’s instructions), or
•
only use the speed required by the
instrument,
•
the tool is absolutely dry.
For safety reasons, do not change the tool while
the motor is running.
