5.52.185.01.01.02
13
5
Technical data
Capacity
800 kg
1 t
1,6 t
2,5 t
3,2 t
6,3 t
9 t
Number of chain falls
1
1
1
1
1
2
3
Load chain dimensions
mm
5,6x15,8
5,6x15,8
7,1x20,1
9,0x24,8
10x28,1
10x28,1
10x28,1
low headroom dimension
mm
280
300
335
375
395
540
680
lever force approx.
N
290
360
340
370
370
380
390
weight* approx.
kg
5,7
5,9
8,0
11,2
15,0
26,0
40,0
weight per add. m lift approx.
kg
0,7
0,7
1,1
1,7
2,3
4,7
7,0
5.1
Main dimensions
Dimensions
mm
800 kg
1 t
1,6 t
2,5 t
3,2 t
6,3 t
9 t
A
119
119
126
150
159
217
304
B
144
144
159
173
190
190
190
C
35,5
42,5
42,5
47
50
60
85
D
245
245
265
265
415
415
415
E
97
97
100
102
112
112
112
F
14
15
19
21
24,5
34
41,5
G
26,5
29
32
36,5
39
50
72,5
H
280
300
335
375
395
540
680
Illustration 6
6
Installation
Please observe the following points in order to avoid any damage to equipment or injury of person:
Please read chapter "Safety".
Before loading the hoist make sure the hooks are placed safely. The safety catch of the hook must be
closed.
Make sure that the fastening position cannot be changed either by the load nor by other influences.
6.1
Tools
7
Operation
Only people that are familiar with the operation of the lifting devices and cranes may be entrusted with their
operation. They must be authorized by the employer for the operation of the equipment. The employer must
ensure that the operating instructions are available near the equipment and that they are accessible for the
operating personnel.
7.1
Devices from 800 kg up to 9000 kg
Before start up please make sure the free-wheeling mechanism is deactivated.
Forcible pulling may possibly close the brake and stop the chain. Should this be the case place the switching
pin in position "▼", do some lowering operation movements and begin lifting again.
Lifting or pulling
Turn the switching pin in position (1) lifting or
pulling as marked on the type plate and move the
load by operating the hand lever.
Lowering or relieving
Turn the switching pin in position (2) lowering or
relieving and move the load by operating the hand
lever.
Illustration 7
7.1.1
Free-wheeling of chain
When the unit is used appropriately, unintended activation of the free-wheeling mechanism under load is
impossible. Opening of the brake system with only small load is possible, this is no mistake.
