HADEF 238/10 Скачать руководство пользователя

Страница: 9 / 15

5.52.208.00.01.06



The winch must be set up and attached in such a way that it cannot change position neither by the load

nor by other influences.

6.1

Installation of the winch

The winches can be installed in any position desired, make sure, however, that the prescribed rope exit is
correct.

Make sure the attachment surface is flat/plain and that installation is made stress-free to ensure safe
functioning.

Use the screws mentioned in the table for installation. Tighten all screws evenly.

Distance of holes

Capacity

1st layer

holes of the

installation area

fastening screws

strength

8.8

Tightening

moment

250 (2x125)

192

100

M12

500 (2x250)

223

115

M12

1000 (2x500)

254

141

M12

1500 (2x750)

254

178

M12

2000 (2x1000)

360

196

M20

431

3000 (2x1500)

386

251

M20

431

5000 (2x2500)

386

316

M20

431

7500

455

350

M20

431

*MV 1500

165

210

M16

214

*MV 3000

446

251

M20

431

*MV 5000

456

316

M20

431

*MV = Marine-Version

6.2

Selection of wire ropes



Wire ropes acc. to EN 12385-4 - Lifting ropes



Stainless wire ropes and special wire ropes are available on request.



Diameter and nec. minimum breaking load must be acc. to the data mentioned in the table in chapter

"Technical Data" resp. acc. to the details mentioned on the type plate.

Recommendation of wire ropes



Steel-reinforced wire ropes



For larger pulling rope forces, fibre-core wire ropes can also be used.



For unguided loads, - non-twisting or at least twist-resistant wire ropes.



For several rope layers winded through the drum, - steel-reinforced wire ropes.

WARNING!

It is not allowed to use plastic wire ropes or plastic-coated wire ropes.

6.3

Wire rope fastening

There is a plate on the winch indicating the wind up direction.

Standard

Separation partition 250-500kg

Separation partition 1000-1500kg

Illustration 1

Illustration 2

Illustration 3

*For winches subject to approval by Germanischer Lloyd, at least 3 rope layers are prescribed to remain on the drum.

Содержание 238/10
















Результаты поиска

Содержание 238/10

Отзывы:

Похожие инструкции для 238/10

Бренды по названию

Популярные бренды

HADEF 238/10, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание 238/10

Отзывы:

Похожие инструкции для 238/10

Бренды по названию

Популярные бренды