5.52.208.00.01.06
11
7
Operation
Only people that are familiar with the operation of the lifting devices and cranes may be entrusted with their
operation. They must be authorized by the employer for the operation of the equipment. The employer must
ensure that the operating instructions are available near the equipment and that they are accessible for the
operating personnel.
Lifting and lowering by turning the hand crank.
Lifting load – turn clockwise.
Hold load – release hand crank. The load holds
automatically. Acc. The different types, the crank
can removed in each position or the crank grip
can fold back.
Lowering load – turn anti clockwise.
Wirerope winch from 2000 kg capacity and up
By changing the crank to the other driving point, it is easier
to move larger loads.
7.1
Free-wheeling mechanism of the drum
For engaging or disengaging of the drum for controlled feeding-out of the uncharged wirerope.
Disengaging
Turn the drum approx. 40 mm in direction A.
Push the disengaging pin in direction C.
The wirerope can now be unwinded by hand
freely.
Illustration 5
Engaging
Push the disengaging pin in direction B.
Turn the rope drum until it stops.
The winch now is ready to lift again.
DANGER!
The following is not allowed:
Disengaging under load.
Manipulation of the disengaging device.
7.2
Brake as slipping clutch to disengage the drum
Adjustment of the slipping clutch
4 Loosen the safety screws (1)
Adjust the slipping clutch at the set ring (2)
direction A = brake pressure increases,
direction B = brake pressure decreases
4 Tighten the safety screws (1) again.
Illustration 6
