background image

 
 
 
 
 

Warranty Terms and Conditions 

 
 

Hacker Brushless Motors warrants products to be free from defects at the date of purchase. This 

warranty does not cover any component parts damaged by use or modification. Hacker Brushless 

Motors reserves the right to change or modify this warranty without notice. 

 

In that  Hacker Brushless Motors has no control over the final assembly, no liability shall be 

assumed nor accepted for any damage resulting from the use by user of the final assembled 

product, the user accepts all resulting liability. 

All returns require a “Merchandise Return Authorization (MRA)”, which can be obtained by 

contacting Hacker Brushless Motors. No returns of any type will be accepted without a MRA 

number and will be returned to the sender. The following information is required for obtaining a 

MRA number: Customer name (or Store name), Invoice number, part or model number and 

explanation of defect or problem. 

 

Hacker Brushless Motors must authorize all returns within 7 days from receipt of order 

 

All returns must have a copy of the original invoice with MRA number 

 

All returning packages must have the MRA number clearly marked on the outside of the 

packaging 

 

All packages shall be inspected upon delivery. All claims for damaged products must be made 

with carrier within 3 days of the receipt of the package. 

 

All defective items must be processed through the Manufacturer or the Distributor of the product 

 

Sender must prepay all transportation and insurance charges 

 

All returning items must be in new, saleable condition. They must have original packing 

material, manuals and accessories

 

 
 
 

 

Warning: Once the Motor Battery Pack is connected, handle the model with extreme 
care! 

Ensure that you are well clear of the propeller at all times. Rotating propellers are 

extremely dangerous! 

 

Always Connect the motor battery pack just before flight and disconnect it immediately after 
landing the model. 

 

Warning: Even when the switch is ‘off’ remember the Motor Battery pack may be 
connected, handle the model with extreme care and stay well clear of the Propeller!

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Copyright 06/07 – Hacker Motor GmbH   5 

Содержание Pro Series







Отзывы: