Hacker JETIBOX, Руководство пользователя

Страница: 6 / 20

Manual JetiBox
6
6 Setup your MasterSpin with JetiBox
The settings will be done by four push-buttons:
Left L
Right
R
Up
U
Down D
Plug in the receiverlead from the MasterSpin ESC to the „ -“ at the right side of
JETIBOX.
Before connecting the flight battery remove for the sake of safety the propeller.
Do not connect anything to the connector designated with -+ .
Connect the flight batteries and switch on the switch (void for Spin11). On the display ap-
pears the name of the
connected controller. By means of the push-buttons L and P more detailed informations are
acquired of your controller.
By means of the push-button D we get to the option line of basic régimes where we either
can choose reading out of
measured values or setting of controller parameters (Measure or Setting), with push-buttons
L and P we choose
MEASURE – MAN. SETTING – AUTO SET.
R/X-Lead use by BEC-Typ, seperate Lead on the OPTO-Typs