Hach Polymetron 9500 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 50

Hach Polymetron 9500 Скачать руководство пользователя страница 47

Option

Description

MODBUS STATS

Displays Error and Good count stats for selected port.

• Sensor port 1, 2, 3 or 4
• Network port
• Service port
• Clear stats

SYSTEM DATA

Displays the current system current, temperature and voltage data.

Warning and error conditions

Follow the steps below to acknowledge controller warnings.

1.

Push the

menu

key and select DIAGNOSTICS.

2.

Select the device (controller, sensor, network card) with the warning or error and push

enter

.

3.

Select the warning, error or event list and push

enter

.

4.

Select YES and push

enter

to acknowledge the warning.

Note: Errors cannot be acknowledged.

Device scan information

Display message

Action

INSTALLING DEVICE... PLEASE WAIT

The controller has found a new device. No action is
necessary. The controller automatically performs an
installation process for the new device and displays the
main measurement screen of the device installed in the
number one position.

DEVICE MISSING <device id>

A previously installed device has been removed from
the controller or is not detected.

• Push the

enter

key to continue.

• Push the left arrow key to select or de-select a

missing device.

• Push the

enter

key to delete the missing device.

The controller will display the main measurement
screen for the device in the number one position.

Note: This message also displays when a device is missing and
a new device has been installed. After the missing device is
deleted, the controller automatically installs the new device and
displays INSTALLING DEVICE... PLEASE WAIT. The controller
then displays the main measurement screen for the device
installed in the number one position.

Replacement parts and accessories

Note: Product and article numbers may vary for some selling regions. Contact the appropriate distributor or refer to
the company website for contact information.

General

Description

Item number

4 GB Secure Digital Memory (SD) card

9218100

Controller installation kit

8806200

DataCom cable

LZX887

English

45

«
...
45
46
47
48
49
...
»

Содержание Polymetron 9500



















































Отзывы:

Нет отзывов