manualshive.com logo in svg

Hach POLYMETRON 9135, Руководство оператора

Поделиться
Скачать
Hach POLYMETRON 9135 Скачать руководство пользователя страница 3

Transmitter 9135 - pH/redox measurement 

 

221=191=035   Issue. N 

Hach Ultra Analytics 

09/2005

 

This instrument conforms to the European Directives : 
 
-  89/336/CEE modified by the directive 93/68/CEE 
-  73/23/CEE modified by the directive 93/68/CEE 

 
 

Warning ! 

 

There are no user-serviceable parts in either the transmitter or sensor. Only 
Hach Ultra Analytics personnel or their authorized representative should attempt repair of 
the system and only components expressly approved by the manufacturer should be 
used. Any attempt to repair the instrument in contradiction of these guidelines may result 
in damage to the instrument and injury to the person making the repair. It will also void the 
warranty and may compromise the safe operation, electrical integrity or CE compliance of 
the instrument. 

 

Hach Ultra Analytics 

6 route de Compois – CP212 

CH-1222 Vesenaz Geneva 

Tél.  + 41 22 855 91 00 
Fax  + 41 22 855 91 99

 

Dr. Bruno Lange GmbH & Co. KG 

Königsweg 10 - D-14163 Berlin 

Postfach 37 03 63 . D-14133 Berlin 

Telefon  030 - 809 86 - 369 
Telefax  030 - 809 86 - 283

 

 

Note : 
 

This equipment has been tested and found to comply with the limits for Class A digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the instruction manual, 
may cause harmful interference to radio communications. Operation of this equipment in a 
residential area is likely to cause harmful interference in which case the user will be 
required to correct the interference at his own expense. 

 
 

Precautionary Labels : 

 

Read all labels and tags attached to the instrument. Personal injury or damage to this 
instrument could occur if not observed. 

 

This symbol, if noted on the instrument, references the instruction manual 
for operation and / or safety information. 

 

Electrical equipment marked with this symbol may not be disposed of in 
European public disposal systems after 12 August of 2005. In conformity 
with European local and national regulations (EU Directive 2002/96/EC), 
European electrical equipment users must now return old or end-of life 
equipment to the Producer for disposal at no charge to the user. 

Note 

: For return for recycling, please contact the equipment producer or 

supplier for instructions on how to return end-of-life equipment for proper 
disposal. 

Important document. Retain with product records. 

 

 

 

! 

 

 

Содержание POLYMETRON 9135

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды