manualshive.com logo in svg

Hach PHOSPHAX indoor sc, Руководство пользователя, Страница: 19 / 104

Поделиться
Скачать
Hach PHOSPHAX indoor sc Скачать руководство пользователя страница 19

19

Installation

3.4.2 Remove the shipping transport locks

Prior to system start-up, the shipping transport locks must be 
removed from the sc analyzer. 

CAUTION
The enclosure may tip forwards if it has not been fixed in 
place. Only open the enclosure if the enclosure is properly 
mounted.

Important note: 

The cuvette insulation for the measuring unit is 

NOT a transport lock. Do NOT remove the cover on the measuring 
unit.

1.

Open the enclosure door and secure with the door hook.

2.

Remove the transport lock on the analyzer panel (

Figure 9

).

Note: 

If the instrument is operated with a Filter Probe sc, it is equipped 

with an internal compressor.

3.

Remove the cable tie and pull out the compressor transport 
lock to the left (

Figure 10

).

Note: 

Keep the transport locks for transporting and storage. 

Figure 9 Remove the analyzer panel transport locks

1

Transport lock

Содержание PHOSPHAX indoor sc









































































































Отзывы:

Нет отзывов