4.
Reposition the receiving antenna for the device receiving the interference.
5.
Try combinations of the above.
2.2.1 Hazardous location
W A R N I N G
Explosion hazard. The GS1440 sensor is not approved for use in hazardous locations.
The GS2440EX sensor is compliant with ATEX (EU), UKEX (UK), IECEx and North American
(US/Canada) hazardous location requirements. Refer to
on page 3. It is important for the
user to obey all of the conditions of use to keep safety compliance.
• The GS2440EX sensor is an isolated metal part with a maximum capacitance of 97.2 pF on the
enclosure screws. Make sure to use grounding or installation conditions that prevent electrostatic
charging of the GS2440EX sensor. Refer to the instruction manual from the manufacturer for
instructions on how to prevent electrostatic charging.
• The GS2440EX sensor must not be disassembled.
• If the GS2440EX sensor is installed in a hazardous location, it is the responsibility of the end user
to select the correct barriers to use with the sensor.
• Obey all ATEX, UKEX, IECEx, North American Classification Certificate specifications and the
national and local regulations.
• Obey the safety warnings of the other intrinsically safe (Ex) equipment installed near the sensor.
2.2.2 EMI (electro-magnetic interference)
The GS1140 and GS2440EX sensors are compliant with the certifications that follow:
• EU EMC Directive 2014/30/EU
• UKCA Electromagnetic Compatibility Regulations 2016
• FCC Part 15B
• ICES-003
2.3 Icons used in illustrations
Manufacturer supplied parts
Do not use tools
2.4 Intended use
The GS1440 and GS2440EX sensors are intended for use by wastewater professionals to monitor
levels of hydrogen sulfide (H
2
S) in liquids and air. The GS1440 and GS2440EX sensors are not
intended to measure other types of dissolved sulfide, such as HS
-
or S
2-
. Typical installation locations
are primary wastewater treatment, wastewater collection and wastewater conveyance systems.
2.5 Product overview
D A N G E R
Do not use the GS1440 or GS2440EX sensor as a safety device to identify the hydrogen sulfide
concentration in an area. Obey all applicable regulations and occupational health and safety
precautions before entry into confined spaces and toxic hazard environments. Get advice from the
occupational health and safety department at the workplace or the government regulatory body to
identify the possible hazards and safety standards.
English
7
Содержание GS1440
Страница 541: ......