Hach 003070HY, Руководство пользователя

Страница: 16 / 32

Setting the SDI Delay
Page 16
Sonde Setup
3.5 Setting the SDI Delay
1. Highlight SDI:Delay and press
SELECT
.
2. Enter the delay of the SDI address (5–994 seconds) using the cursor keys and the
SELECT
key.
3. Press
DONE
when complete.
3.6 Assigning a Site ID
This feature will assigns a description of the site where the Sonde is located.. The Site ID uses a
maximum of 15 letters, numbers, and blanks.
1. Highlight Site ID and press
SELECT
.
2. Enter the new Site ID using the cursor keys and the
SELECT
key. To add space, highlight
<<<Space>>> and press
SELECT
. To delete an error, press the
BACKSPACE
key.
3. Press
DONE
when complete.
3.7 Assigning the MODBUS Address
1. Highlight MODBUS:Address and press
SELECT
.
2. Enter the new Modbus address (1–247) using the cursor keys and then the
SELECT
key.
3. Press
DONE
when complete.
3.8 Setting the Sonde Time and Date
Note: When using a DataSonde 3 or Recorder, this option is displayed as “D/T:MDY/HMS”.
1. Highlight Date-Tim:MDY/HMS and press
SELECT
.
2. Set the date (month, day, year) and time (hours, minutes, seconds) for the Sonde using the
cursor keys and the
SELECT
key.
3. Press
DONE
when complete.
3.9 Turning the AutoLog On/Off
1. Highlight Autolog:On/Off and press
SELECT
.
2. Choose to turn the circulator on or off using the cursor keys and the
SELECT
key. Select 0
(zero) to disable the autolog or select 1 to enable the autolog.
3. Press
DONE
when complete.