Hach Ultra POLYMETRON 9182 Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 92

background image

Oxygen analyser (ppb) - 9182 -

A5-2

FIRST AID MEASURES

In case of contact, immediately flush eyes or skin with copious amounts of water for at least 15 minutes
while removing contaminated clothing and shoes. Assure adequate flushing of the eyes by separating the
eyelids with fingers. If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is
difficult give oxygen. If swallowed, wash out mouth with water provided person is conscious. Call a
physician immediately. Discard contaminated clothing and shoes.

FIRE FIGHTING MEASURES

Non combustible. Use extinguishing media appropriate to surrounding fire conditions. Do not use water.
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
Reacts violently with water. Emits toxic fumes under fire conditions.

ACCIDENTAL RELEASE MEASURES

Evacuate area. Wear self-contained breathing apparatus, rubber boots and heavy rubber gloves. Sweep
up, place in a bag and hold for waste disposal. Avoid raising dust. Ventilate area and wash spill site after
material pickup is complete.

HANDLING AND STORAGE

Danger: under fire conditions material will melt and flow. Molten material reacts violently with water and
can react with aluminium, tin, zinc and their alloys to generate flammable and explosive hydrogen gas.
Potassium hydroxide reacts with trichloroethylene to form spontaneously flammable dichloroacetylene.

EXPOSURE CONTROLS/PERSONAL PROTECTION

Wear appropriate NIOSH/MSHA-approved respirator, chemical-resistant gloves, safety goggles, other
protective clothing. Safety shower and eye bath. Use only in a chemical fume hood. Faceshield (8-inch
minimum). Do not breathe dust. Do not get in eyes, on skin, on clothing. Avoid prolonged or repeated
exposure. Wash thoroughly after handling. Corrosive. Toxic. Keep tightly closed. Do not allow contact
with water. Store in a cool dry place.

TOXICOLOGICAL INFORMATION

Acute effects: harmful if swallowed, inhaled or absorbed through skin. Material is extremely destructive to
tissue of the mucous membranes and upper respiratory tract, eyes and skin. Inhalation may be fatal as a
result of spasm, inflammation and edema of the larynx and bronchi, chemical pneumonitis and pulmonary
edema. Symptoms of exposure may include burning sensation, coughing, wheezing, laryngitis, shortness
of breath, headache, nausea and vomiting.

DISPOSAL CONSIDERATIONS

Contact a licensed professional waste disposal service to dispose of this material.

The above information is believed to be correct but does not purport to be all inclusive and shall be used only
as a guide.

«
...
80
81
82
83
84
...
»

Содержание POLYMETRON 9182





























































































Отзывы:

Нет отзывов

Похожие инструкции для POLYMETRON 9182

Бренд: Magnetic Instrumentation Страницы: 63

Бренд: Badger Meter Страницы: 47

VOLUTANK Petro 3003

Бренд: Bartec Страницы: 10

Бренд: P3 International Страницы: 1

Бренд: Hanna Instruments Страницы: 2

Бренд: Ansul Страницы: 24

Бренд: ENDA Страницы: 2

Бренд: Heinrichs Страницы: 31

AccuPoint 2 ATP

Бренд: Neogen Corporation Страницы: 16

Comark Diligence 600

Бренд: Fluke Страницы: 61

OPTIFLUX 4040 C Series

Бренд: KROHNE Страницы: 20

Бренд: Pyle Pro Страницы: 2

Бренд: Caen Страницы: 63

Бренд: Caen Страницы: 35

NOVAplus biogas

Бренд: mru Страницы: 78

Бренд: Allen Organ Company Страницы: 29

Бренд: Biobase Страницы: 36

Бренд: Heyuan Intelligence Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды