HACA LEITERN 0529.74.50, Инструкция по эксплуатации

Страница: 46 / 64

Lorenz Hasenbach GmbH u. Co. KG · D-65517 Bad Camberg · Tel. 0049 6434 / 25-0 · www.haca.com
46
Lorenz Hasenbach GmbH u. Co. KG · D-65517 Bad Camberg · Tel. 0049 6434 / 25-0 · www.haca.com
Fig. 10 Example of aluminium single
rail ladder with movable end stop
3. Accessories
Further information and more detailed assembly instructions for individ-
ual accessories are available to view and download from the download
section of our website at www.haca.com.
3.1 Fall arrest rail
A ladder must have fall protection as from a fall height of > 3 m in accor-
dance with DIN EN ISO 14122 and as from > 5 m in accordance with DIN
18799. The punched, corrosion-protected fall arrest rails are available in
lengths of 1.96m, 2.80m, 3.64m and 5.88m. Blank fall arrest rails are
available in 6m lengths. These are not galvanised and are unstained or
not anodised.
Step irons or ladders equipped with the HACA fall protection system may
only be accessed with a HACA fall protection runner in conjunction with a
safety harness in accordance with DIN EN 361.
3.2 End stops
End stops prevent the fall protection runner unintentionally slipping out
of the fall arrest rail. End stops must be mounted at the start and end
of fall arrest rails and also on notches and other interruptions to the
rails. This also applies when using an attachable or pivoting entry aid.
The tongues of the end stops additionally ensure that the fall protection
runner can only be inserted in the rail in the effective direction. There are