Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Hot Press PM-1306
Author: S.D.T.
/KM
REGULATIONS AND GENERAL WARNING NOTES
Edition: 02/2005
Page
A-12
Replaces: 01/2002
A.8
Qualification of personnel
Each task must be assigned to a person trained in the work to be carried out and trained in correct usage
as well as fully aware of any remaining risks and dangers in that work. Personnel must not carry out work
outside their area of competence, knowledge and responsibility.
T
ABLE
4
-
Q
UALIFICATIONS
FIRST LEVEL MACHINE CONTROL OPERATOR
Indicates non qualified personnel i.e. without specific competencies and able only to
carry out simple tasks, including in practice running the machine with the use of the
controls on the push-button panel and loading and unloading materials used during
production. Furthermore, this operator can work with the machine while the
machine's protective devices are enabled, to carry out simple, ordinary jobs for
adjusting, starting or re-starting production following enforced down-time.
MECHANICAL MAINTENANCE PERSON
A qualified technician able to run the machine under normal conditions, to intervene
on mechanical parts to make all adjustments as well as the necessary mechanical
maintenance and repair jobs, also with the protective devices disabled.
ELECTRICAL MAINTENANCE PERSON
A qualified technician able to run the machine under normal conditions, and also with
the protective devices disabled; s/he is entrusted with all electrical jobs involving
adjustment, maintenance and repairs. This operator is able to work while the interior
of the cabinets and the connector blocks are electrically live.
QUALIFIED TECHNICIAN
A person who is by training, experience, education and knowledge of accident
prevention regulations and procedures able to perceive and avoid possible dangers
and who is authorized by the plant's safety officer to carry out all necessary
mechanical and electrical intervention.
SPECIALIZED SUPERVISOR
An expert, specialized technician provided by the Manufacturer to carry out complex
operations in particular situations, installation, first start-up, instruction of the
Customer's personnel, as well as overhauls of and modifications to the machine.
Hot-pressing device PM-1306
