Haas Automation, Inc. | www.HaasCNC.com | 800-331-6746
Additional Information
1. The toolholder’s bore and the cutting tool must be thoroughly cleaned (use a
cleaning cloth/rag to clean) to prevent the cutting tool from getting stuck.
2. During the heating procedure, if alarms
E1, E2, E3, E4, or E5
appear on the
LCD Display Window, the machine has experienced one of the following issues:
E1: Machine heating error. Please check heating head connection.
E2: Heating head over temperature.
E3: 3-phase power supply in error.
E4: No toolholder in heating head.
E5: Machine’s power module is over temperature.
3. This induction shrink fit machine generates heat during use, and must be
operated in a well ventilated area. The machine should be placed in a clean,
dry location, and protected from strong hits. DO NOT attempt to service your
machine! If you are experiencing issues, contact your local HFO for service.
4. For safety purposes, keep flammable materials away from this machine
while in use.
Machine Specifications
1. Power Supply: 220V AC 60 HZ, 3 phase + ground terminal
2. Max. consumption power: 10,000 Watts
3. Dimensions (W x D x H): 15" x 16" x 25.75" (380 x 405 x 655 mm)
