HAAS + SOHN HSP 8 CATANIA-II-RLU, Инструкция по установке и эксплуатации

Страница: 16 / 28

GB
12
9.1.1. Operating mode Weekly prog. – settings
Can only be selected on HSP 6, HSP 7, HSP 8, HSP 2 Premium and optionally with HSP 2 Home (in
conjunction with WLAN module).
oper. mode
b001
Procedure:
The week program function is selected with the "Plus" or "Minus"
buttons.
The week program function is chosen by pressing the
"OK" button.
off
on
weekly prog.
back
ON/OFF
weekly prog. The respective week day can be selected with the "Plus" or
"Minus" buttons.
• The day is chosen by pressing the "OK" button.
mo
tu
we
th fr
sa su
1 E 00:00 A 06:00 25°
2 E 06:00 A 18:00 23°
3 E 18:00 A 24:00 26°
change
• Setting heating zones:
• The required switch-on time can now be set with the "Plus" or "Minus" buttons.
• The shut down time on the respective week day can be programmed by pressing the right-hand arrow
button.
• The Target room temperature is selected by pressing the right-hand arrow button again.
• This procedure can be used to set 3 heating zones for each day with the respective room temperature.
• Adjust the temperature in the room
• Week program symbol active:
10:34
To exit the function, press the "On/Off" button.
28 °C
Note
Early start: If the stove is on standby between heating zones, it is
possible to start the stove early by pressing the "On/Off" button.
The next heating zone is selected directly for this.
23 °C
standby
menu
Note
Early stop: It is also possible to activate an early stop in the week program heating mode by pressing the
"On/Off" button, in order to end this one heating zone before time. The next heating zone will start again as
previously determined.