7) Plug the product into a convenient
standard 120-volt grounded wall receptacle.
8) Press the ON/OFF button ( ) on the canister
front to turn your product ON (it’s
inside the inverted orange triangle). The GREEN
Power ON light will illuminate as will the
ORANGE Ready Light. (Fig 4),
Your product is ready to use when the
ORANGE Ready Light deactivates after about 3-5
minutes, (should take no longer than 8 minutes)
indicating the unit is heated and ready to steam.
The amount of time is determined by the amount
of water added to the tank which will also
determine the duration time for use.
9) Place an Ultra-MicroFiber Pad on the floor with
the ‘hook & loop’ side facing up. Lightly press
the product Steam Head on the pad,
making sure the Ultra-MicroFiber Pad is centrally
positioned to the bottom of the unit. (Fig 5a & b)
The specially designed bottom of the
Steam Head will grip the pad.
10) Push and pull the Steam Head slowly
across your floor to thoroughly steam clean
each section. (Fig 6)
To Refill Water Tank:
11) When you no longer have steam emitting from
the nozzle, this signifies that there is no more
water in the Water Tank. Rest the Steam Head on
the Floor Protector Resting Mat while you follow
the steps to refill the water tank.
12) To refill the water tank, turn your off and unplug
it from the electrical wall outlet.
Let the unit depressurize for 30 seconds. Then
follow steps 5 - 8 to continue steaming.
13) Should the Ultra-Microfiber Pad become saturated or
soiled, you will want to replace it with a clean pad.
Turn the OFF and wait until the unit and
pad cools down for approximately five (5) minutes
before removing the Ultra-Microfiber Pad from the
Steam Head. Remove the pad by using your foot
(Fig 7) to hold the pad while you
Using the product
to sanitize your floor (cont):
www.haanusa.com 877-HAAN DIRECT / 877-422-6347
pg 11
Never
leave the Ultra-
MicroFiber Pad on your
product when you have
finished using the unit.
Fig 7
Fig 4
Using Your Product
Fig 5
b
a
Yes
NO!
Fig 6
