Haag-Streit Second observer tube Скачать руководство пользователя страница 4

4

DEUTSCH

ENGLISH 

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

PORTUGUÊS

SVENSKA

© HAAG‑STREIT AG, 3098 Koeniz, Switzerland ‑ HS‑Doc. no. 1500.7220394‑04040 – 2021 – 08

NOTE!

• This device must only be operated by qualified personnel. The

owner is responsible for their training.

• This device may only be used in accordance with the instructions in

the 'Purpose of use' chapter.

1.6 Disinfection

NOTE!

The device can, but does not need to be disinfected. For more

information, please refer to the 'Maintenance' chapter.

1.7 Warranty and product liability

• Haag-Streit products must be used only for the purposes and in the manner

described in the documents distributed with the product.

• The product must be treated as described in the ‘Safety’ chapter. Improper

handling can damage the product. This would void all guarantee claims.

• Continued use of a product damaged by incorrect handling may lead to personal

injury. In such a case, the manufacturer will not accept any liability.

• Haag-Streit does not grant any warranties, either expressed or implied, including

implied warranties of merchantability or fitness for a particular use.

• Haag-Streit expressly disclaims liability for incidental or consequential damage

resulting from the use of the product.

• This product is covered by a limited warranty granted by your seller.

• For USA only: This product is covered by a limited warranty, which may be

reviewed at www.haag-streit-usa.com.

1.8 Reporting obligation

NOTE!

Any serious incident that has occurred in relation to the device must be

reported to Haag-Streit and the competent authority of the Member

State in your country.

1.9 Description of symbols

General warning, read the

accompanying documentation

European certificate of

conformity

Trademark of the manufacturer Haag-

Streit AG

Manufacturer

Haag-Streit reference number

Serial number

2 Purpose of use

The second observer tube was developed exclusively for the Haag-Streit slit lamp

BQ 900. It enables additional persons to take part in the examination.

Содержание Second observer tube










Отзывы: