Haag-Streit Second observer tube Скачать руководство пользователя страница 3

3

DEUTSCH

ENGLISH 

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

PORTUGUÊS

SVENSKA

DEUTSCH

ENGLISH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

PORTUGUÊS

SVENSKA

© HAAG‑STREIT AG, 3098 Koeniz, Switzerland ‑ HS‑Doc. no. 1500.7220394‑04040 – 2021 – 08

1 Safety

DANGER!

Failure to comply with these instructions may result in material damage

or pose a danger to patients or users.

WARNING!

These warnings must absolutely be complied with to guarantee safe

operation of the product and to avoid any danger to users and to

patients.

NOTE!

Important information, please read carefully.

1.1 Comments on these instructions for use

NOTE!

In these instructions for use the point is used as decimal separator.

1.2 Ambient conditions

Temperature

−40 °C ... +70 °C

Air pressure

500 hPa ... 1060 hPa

Transport

Relative humidity

10 % ... 95 %

Temperature

−10 °C ... +55 °C

Air pressure

700 hPa ... 1060 hPa

Storage

Relative humidity

10 % ... 95 %

Temperature

+10 °C ... +35 °C

Air pressure

800 hPa ... 1060 hPa

Use

Relative humidity

30 % ... 90 %

1.3 Shipment and unpacking

• Before unpacking the device, check whether the packaging shows traces of

improper handling or damage. If this is the case, notify the transport company

that delivered the goods to you.

• Unpack the device together with a representative of the transport company.

Make a report of any damaged parts. This report must be signed by you and by

the representative of the transport company.

• Leave the device in the packaging for a few hours before unpacking it

(condensation).

• Check the device for damage after it is unpacked.

• Return defective devices in the appropriate packaging.

• Store packaging material carefully so that it can be used for potential returns or

when moving.

• Check that the connection parts of the accessories are in the correct position

(screw connections, quick-release fasteners).

1.4 Installation warnings

WARNING!

• Do not modify this device without authorization of the manufacturer.

Installation and repairs may only be performed by trained

specialists.

• Only original Haag-Streit spare parts may be used.

1.5 Operation, environment

WARNING!

• Due to the risk of injury, it must not be possible for passing persons

to bump against the second observer tube during an examination.

• The second observer tube must be mounted where its contours

which protrude over the table top will not impede passing persons.

• Avoid moisture.

Содержание Second observer tube










Отзывы: