Installation accessories
安装附件介绍
Wear an ESD wrist strap, and make sure the wrist strap makes good skin contact and is
reliably grounded.
操作者需佩戴防静电腕带，确保防静电腕带与皮肤良好接触，并确认
防静电腕带已经良好接地。
The installation tools are not provided with the access controller. Prepare them yourself.
设备不随机提供安装工具，请用户根据实际安装需求自己准备安装工具。
Mounting the access controller on a workbench
安装设备到工作台
2
1
Flathead screwdriver
一字螺丝刀
Phillips screwdriver
十字螺丝刀
Needle-nose pliers
尖嘴钳
Wire-stripping pliers
剥线钳
ESD wrist strap
防静电腕带
Diagonal pliers
斜口钳
Marker
记号笔
Cage nut
(user-supplied)
浮动螺母（用户自备）
Grounding cable
(provided)
地线（标配）
Removable cable tie
(user-supplied)
可拆卸式扎带（用户自备）
M6 screw
(user-supplied)
M6
螺钉（用户自备）
Front mounting bracket
(provided)
前挂耳（标配）
Rear mounting bracket
(provided)
后挂耳（标配）
M4 screw
(provided)
M4
螺钉（标配）
Airflow of the access controller
设备的风向设计
H3C WX5540H Access Controller Installation Quick Start-6W103
H3C WX5540H
无线控制器 快速安装指南
-6W103
BOM: 3104A0FH
Tool list
工具参考
Rubber feet
(provided)
脚垫贴（标配）
Console cable
(provided)
配置电缆（标配）
Make sure the workbench is stable and is reliably
grounded. Do not place heavy objects on the access
controller. Attach the rubber feet to the four round
holes in the chassis bottom. Place the access
controller on the workbench.
保证工作台的平稳与良
好接地，并且不要在设备上放置重物。粘贴脚垫贴到
设备底部，将带脚垫贴的设备平放到工作台上。
Left-to-right airflow
设备采
用左进右出的风道设计
Make sure the air inlet and outlet vents are not blocked and the installation site has a good
ventilation system.
请确保设备的进、出风孔不被遮挡，并将设备安装在具有良好通风散热系统的环境中。
!
Heat gun
热风枪
