H3C WX5540H страница 4 Скачать руководство пользователя

Страница: 4 / 4

The information in this document is subject to change without notice.

本文档中的信息如有更改，恕不另行通知

如需了解产品及安装方面的更多信息，请登录

H3C

网站

www.h3c.com

1. Remove the cover from the power receptacle.

取下连接器的保护盖。

2. Plug one end of the DC power cord into the receptacle of the DC power module, and Fasten

the screws to secure the cord in place.

将设备的直流电源线一端插到电源输入插口上，并使

用螺丝刀将电源线紧固螺钉拧紧。

3. (Optional.) Use a removable cable tie to secure the power cord to the handle of the power

module. (

可选

)

用可拆卸式扎带将电源线固定在电源拉手上。

Connecting the DC power cord

连接直流电源线

2. Plug one end of the AC power cord into the AC-input power receptacle of the AC power

module.

将设备的交流电源线一端插到电源输入插口上。

3. Pull the bail latch downwards to secure the plug to the power receptacle.

将电源线卡勾朝下

扳，卡住电源线插头。

Содержание WX5540H

Страница 1: ...pplied M6 screw user supplied M6 Front mounting bracket provided Rear mounting bracket provided M4 screw provided M4 Airflow of the access controller H3C WX5540H Access Controller Installation Quick S...

Страница 2: ...e use a minimum of two people to mount the access controller in a rack Place the access controller in the rack and secure it to the rack posts by using M6 screws M6 Grounding the access controller Cor...

Страница 3: ...rounding cable of the building to the grounding strip on the rack Make sure the rack is reliably grounded 2 Use the grounding cable provided with the access controller to connect the access controller...

Страница 4: ...f the DC power cord into the receptacle of the DC power module and Fasten the screws to secure the cord in place 3 Optional Use a removable cable tie to secure the power cord to the handle of the powe...