H3C UniServer BX1010E, Руководство пользователя

Страница: 37 / 48

9
Internal connections
Switch module and mezzanine network adapter connections
The installation positions of switch modules and mezzanine network adapters must allow their
internal connections as described in
Table 5 .
Table 5 Switch module and mezzanine network adapters connections
Blade server model
Max number of
mezzanine network
adapters on the
server
Internal connection diagram between
switch modules and mezzanine network
adapters
H3C UniServer B5700 G5 3 Figure 7
NOTE:
The connection diagrams are
logical diagrams, presenting the
connection relations between the
mezzanine network adapter slots
and switch module slots. For the
specific locations of the
mezzanine network adapter slots
and switch module slots, see the
marks on the modules.
H3C UniServer B5700 G3 3 Figure 7
H3C UniServer B7800 G3 6 Figure 8
H3C UniServer B5800 G3 3 Figure 7
Switch module and mezzanine network adapter internal connections (method 1)
As shown in Figure 7 , switch modules and mezzanine network adapters are connected as follows:
•
Network adapters embedded in the system board connected to the active and standby OMs.
•
Mezzanine network adapter 1 connected to switch modules in slots 1 and 4.
•
Mezzanine network adapter 2 connected to switch modules in slots 2 and 5.
•
Mezzanine network adapter 3 connected to switch modules in slots 3 and 6.