6-4
The S6520X-30HC-EI & S6520X-30HC-HI switches come with the two fan tray slots empty. You
must install two fan trays of the same model for the switch. In
, two LSWM1FANSCBE fan
trays are installed in the fan tray slots. For information about installing and removing a fan tray, see
"
Installing and removing a fan tray
The S6520X-30HC-EI & S6520X-30HC-HI switches come with a filler panel in each expansion slot.
You can select expansion cards for the switch as required. In
, two LSWM4SP8PM
interface cards are installed in the expansion slots. For information about installing and removing an
expansion card, see "
Installing and removing an expansion card
S6520X-54HC-EI & S6520X-54HC-HI
Figure 6-7 Front panel
(1) SFP+ port
(2) SFP+ port LED
(3) Management Ethernet port
(4) Console port (CONSOLE)
(5) Micro USB console port
(6) Mode LED (MODE)
(7) USB port
(8) Mode button
(9) System status LED (SYS)
(10) Expansion card 2 status LED (SLOT2)
(11) Expansion card 1 status LED (SLOT1)
(12) Power module 2 status LED (PWR2)
(13) Power module 1 status LED (PWR1)
(14) QSFP28 port LED
(15) QSFP28 port
(16) Management Ethernet port LED (ACT/LINK)
Figure 6-8 Rear panel
(1) Grounding screw
(2) Fan tray 1 (FAN1)
(3) Expansion card 1 (SLOT1)
(4) Expansion card 2 (SLOT2)
(5) Fan tray 2 (FAN2)
(6) Power module 1 (PWR1)
(7) Power module 2 (PWR2)
The S6520X-54HC-EI and S6520X-54HC-HI switches come with power module slot PWR1 empty
and power module slot PWR2 installed with a filler panel. You can install one or two power modules
for the switch as required. In
, two PSR250-12A1 power modules are installed in the power
module slots. For information about installing and removing a power module, see "
."
1
2
3
4
5
6
7
