33
Step Command
Remarks
3.
(Optional.) Configure
the default precedence
for IPv6 static routes.
ipv6 route-static default-preference
default-preference-value
If you do not specify a
default preference
value, the default
preference value is 60.
Configuring RIPng between an IPv6 MCE and a PE
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create a RIPng process for
an IPv6 VPN instance and
enter RIPng view.
ripng
[
process-id
]
vpn-instance
vpn-instance-name
N/A
3.
Redistribute the VPN
routes.
import-route
protocol
[
process-id
]
[
allow-ibgp
] [
cost
cost
|
route-policy
route-policy-name
] *
By default, no route of any
other routing protocol is
redistributed into RIPng.
4.
(Optional.) Configure the
default cost value for the
redistributed routes.
default cost
value
If you do not specify a default
cost, the default cost is 0.
5.
Return to system view.
quit
N/A
6.
Enter interface view.
interface
interface-type interface-number
N/A
7.
Enable the RIPng process
on the interface.
ripng
process-id
enable
By default, RIPng is disabled
on an interface.
For more information about RIPng, see
Layer 3—IP Routing Configuration Guide
.
Configuring OSPFv3 between an IPv6 MCE and a PE
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create an OSPFv3
process for an IPv6 VPN
instance and enter
OSPFv3 view.
ospfv3
[
process-id
]
vpn-instance
vpn-instance-name
N/A
3.
Set the router ID.
router-id
router-id
N/A
4.
Redistribute the VPN
routes.
import-route
protocol
[
process-id
|
allow-ibgp
] [
cost
value
|
route-policy
route-policy-name
|
type
type
] *
By default, no route of any other
routing protocol is redistributed
into OSPFv3.
5.
(Optional.) Configure a
filtering policy to filter the
redistributed routes.
filter-policy
{
acl6-number
|
ipv6-prefix
ipv6-prefix-name
}
export
[
bgp4+
|
direct
|
isisv6
process-id
|
ospfv3
process-id
|
ripng
process-id
|
static
]
By default, redistributed routes
are not filtered.
6.
Return to system view.
quit
N/A
7.
Enter interface view.
interface
interface-type
interface-number
N/A
8.
Enable the OSPFv3
process on the interface.
ospfv3
process-id
area
area-id
[
instance
instance-id
]
By default, OSPFv3 is disabled
on an interface.