manualshive.com logo in svg

H3C S5820V2H, Руководство по настройке, Страница: 27 / 53

Поделиться
Скачать
H3C S5820V2H Скачать руководство пользователя страница 27

 

20 

[PE1-Vlan-interface40] quit 

# Configure the IP address of the interface Loopback 0 as 101.101.10.1 for the MCE and as 

100.100.10.1 for PE 1. Specify the loopback interface address as the router ID for the MCE and 

PE 1. (Details not shown.) 
# Enable OSPF process 10 on the MCE, bind the process to VPN instance 

vpn1

, disable OSPF 

routing loop detection, and set the domain ID to 10. 

[MCE] ospf 10 router-id 101.101.10.1 vpn-instance vpn1 

[MCE-ospf-10] vpn-instance-capability simple 

[MCE-ospf-10] domain-id 10 

# On the MCE, advertise subnet 30.1.1.0 in area 0, and redistribute the static route of VPN 1. 

[MCE-ospf-10] area 0 

[MCE-ospf-10-area-0.0.0.0] network 30.1.1.0 0.0.0.255 

[MCE-ospf-10-area-0.0.0.0] quit 

[MCE-ospf-10] import-route static 

# On PE 1, enable OSPF process 10, bind the process with VPN instance 

vpn1

, set the domain ID 

to 10, and advertise subnet 30.1.1.0 in area 0. 

[PE1] ospf 10 router-id 100.100.10.1 vpn-instance vpn1 

[PE1-ospf-10] domain-id 10 

[PE1-ospf-10] area 0 

[PE1-ospf-10-area-0.0.0.0] network 30.1.1.0 0.0.0.255 

[PE1-ospf-10-area-0.0.0.0] quit 

[PE1-ospf-10] quit 

# On PE 1, display the routing table of VPN instance 

vpn1

. 

[PE1] display ip routing-table vpn-instance vpn1 

 

Destinations : 13        Routes : 13 

 

Destination/Mask    Proto  Pre  Cost         NextHop         Interface 

0.0.0.0/32          Direct 0    0            127.0.0.1       InLoop0 

30.1.1.0/24         Direct 0    0            30.1.1.2        Vlan30 

30.1.1.0/32         Direct 0    0            30.1.1.2        Vlan30 

30.1.1.2/32         Direct 0    0            127.0.0.1       InLoop0 

30.1.1.255/32       Direct 0    0            30.1.1.2        Vlan30 

127.0.0.0/8         Direct 0    0            127.0.0.1       InLoop0 

127.0.0.0/32        Direct 0    0            127.0.0.1       InLoop0 

127.0.0.1/32        Direct 0    0            127.0.0.1       InLoop0 

127.255.255.255/32  Direct 0    0            127.0.0.1       InLoop0 

192.168.0.0/24      OSPF   150  1            30.1.1.1        Vlan30 

224.0.0.0/4         Direct 0    0            0.0.0.0         NULL0 

224.0.0.0/24        Direct 0    0            0.0.0.0         NULL0 

255.255.255.255/32  Direct 0    0            127.0.0.1       InLoop0 

The output shows that the static route of VPN 1 has been redistributed to the OSPF routing table of 
PE 1. 
# Use similar procedures to configure OSPF process 20 between MCE and PE 1, and redistribute 
VPN 2's routing information from OSPF process 20 into the OSPF routing table of MCE. (Details 

not shown.) 
The output shows that PE 1 has learned the private route of VPN 2 through OSPF. 

Содержание S5820V2H






















































Отзывы:

Нет отзывов