29
Step Command
Remarks
2.
Configure an IPv6 static route
for an IPv6 VPN instance.
ipv6 route-static vpn-instance
s-vpn-instance-name
ipv6-address prefix-length
{
interface-type interface-number
[
next-hop-address
] |
nexthop-address
[
public
]
|
vpn-instance
d-vpn-instance-name
nexthop-address
} [
permanent
] [
preference
preference-value
] [
tag
tag-value
] [
description
description-text
]
By default, no IPv6
static route is
configured.
Perform this
configuration on the
IPv6 MCE. On the
VPN site, configure
normal IPv6 static
routes.
3.
(Optional.) Configure the
default precedence for IPv6
static routes.
ipv6 route-static default-preference
default-preference-value
If you do not specify a
default preference
value, the default
preference value is
60.
Configuring RIPng between an IPv6 MCE and a VPN site
A RIPng process belongs to the public network or a single IPv6 VPN instance. If you create a RIPng
process without binding it to an IPv6 VPN instance, the process belongs to the public network. By
configuring RIPng process-to-IPv6 VPN instance bindings on an IPv6 MCE, you allow routes of different
VPNs to be exchanged between the IPv6 MCE and the sites through different RIPng processes, ensuring
the separation and security of IPv6 VPN routes.
For more information about RIPng, see
Layer 3—IP Routing Configuration Guide
.
To configure RIPng between an MCE and a VPN site:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create a RIPng process for a
VPN instance and enter RIPng
view.
ripng
[
process-id
]
vpn-instance
vpn-instance-name
Perform this configuration on the
IPv6 MCE. On the VPN site,
configure normal RIPng.
3.
Redistribute remote site routes
advertised by the PE.
import-route
protocol
[
process-id
]
[
allow-ibgp
] [
cost
cost
|
route-policy
route-policy-name
] *
By default, no route of any other
routing protocol is redistributed
into RIPng.
4.
(Optional.) Configure the
default cost value for the
redistributed routes.
default cost
value
If you do not specify a default cost
value, the default cost value is 60.
5.
Return to system view.
quit
N/A
6.
Enter interface view.
interface
interface-type
interface-number
N/A
7.
Enable RIPng on the interface.
ripng
process-id
enable
By default, RIPng is disabled.
Configuring OSPFv3 between an IPv6 MCE and a VPN site
An OSPFv3 process belongs to the public network or a single IPv6 VPN instance. If you create an
OSPFv3 process without binding it to an IPv6 VPN instance, the process belongs to the public network.