42
Figure 55
Completing the device driver installation wizard
Setting terminal parameters
To configure and manage the switch through the console port, you must run a terminal emulator program,
TeraTermPro or PuTTY, on your PC. You can use the emulator program to connect a network device, a
Telnet site, or an SSH site. For more information about the terminal emulator programs, see the user
guides for these programs.
The following are the required terminal settings:
•
Bits per second
—9,600.
•
Data bits
—8.
•
Parity
—None.
•
Stop bits
—1.
•
Flow control
—None.
Powering on the switch
Before powering on the switch, verify that the following conditions are met:
•
The power cord is correctly connected.
•
The input power voltage meets the requirement of the switch.
•
The console cable is correctly connected.
•
The PC has started, and its serial port settings are consistent with the console port settings on the
switch.