H3C S5500-SI Series, Руководство по эксплуатации

Страница: 939 / 1217

2-11
# Create a local user named guest and enter local user view.
[Sysname] local-user guest
# Set the authentication password to 123456 (in plain text).
[Sysname-luser-guest] password simple 123456
# Set the service type to Terminal.
[Sysname-luser-guest] service-type terminal
[Sysname-luser-guest] quit
# Enter AUX user interface view.
[Sysname] user-interface aux 0
# Configure to authenticate the user logging in through the Console port in the scheme mode.
[Sysname-ui-aux0] authentication-mode scheme
# Set the baud rate of the Console port to 19200 bps.
[Sysname-ui-aux0] speed 19200
# Set the maximum number of lines the screen can contain to 30.
[Sysname-ui-aux0] screen-length 30
# Set the maximum number of commands the history command buffer can store to 20.
[Sysname-ui-aux0] history-command max-size 20
# Set the timeout time of the AUX user interface to 6 minutes.
[Sysname-ui-aux0] idle-timeout 6
2) Configure the authentication scheme
Configure the authentication server by referring to related parts in AAA Configuration .
After the above configurations, you need to modify the configurations of the terminal emulation utility
running on the user PC accordingly, as shown in Figure 2-4 , thus ensuring the consistency between the
configurations of the terminal emulation utility and those of the switch. Otherwise, you will fail to log in to
the switch.