H3C S5500-SI Series, Руководство по эксплуатации

Страница: 711 / 1217

1-19
Select Connection / SSH / Auth from the navigation tree. The following window appears. Click
Browse… to bring up the file selection window, navigate to the private key file and click OK .
Figure 1-9 SSH client configuration interface 2)
In the window shown in Figure 1-9 , click Open . If the connection is normal, you will be prompted to enter
the username. After entering the correct username ( client002 ), you can enter the configuration
interface.
SSH Client Configuration Examples
When Switch Acts as Client for Password Authentication
Network requirements
z
As shown in Figure 1-10 , Switch A (the SSH client) needs to log into Switch B (the SSH server)
through the SSH protocol.
z
The username of the SSH client is client001 and the password is aabbcc . Password
authentication is required.
Figure 1-10 Switch acts as client for password authentication
Configuration procedure
1) Configure the SSH server