Operation Manual – Information Center
H3C S5500-EI Series Ethernet Switches
Chapter 1 Information Center Configuration
1-7
Task
Remarks
Setting to Output System Information to the Console
Optional
Setting to Output System Information to a Monitor Terminal
Optional
Setting to Output System Information to a Log Host
Optional
Setting to Output System Information to the Trap Buffer
Optional
Setting to Output System Information to the Log Buffer
Optional
Setting to Output System Information to the SNMP NMS
Optional
Configuring Synchronous Information Output
Optional
1.2.2 Setting to Output System Information to the Console
I. Setting to output system information to the console
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable information center
info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
Refer to
Table 1-2
for
default channel names.
Configure the channel
through which system
information can be output
to the console
info-center console
channel
{
channel
-
number
|
channel
-
name
}
Optional
System information is
output to the console by
default, with channel 0 as
the default channel.
Configure the output rules
of system information
info-center source
{
module
-
name
|
default
}
channel
{
channel
-
number |
channel
-
name
} [
debug
{
level
severity
|
state
state
} * |
log
{
level
severity
|
state
state
} * |
trap
{
level
severity
|
state
state
} * ] *
Optional
Refer to
Table 1-4
for the
default output rules of
system information.
Configure the format of
the time stamp
info-center timestamp
{
debugging
|
log
|
trap
}
{
boot
|
date
|
none
}
Optional
The time stamp format for
log, trap and debugging
information is
date
by
default.