2-31
Connecting the power cord
WARNING!
•
Provide a circuit breaker for each power cord.
•
Before connecting the power cord, make sure the circuit breaker for the power cord is turned off.
Table2-4 Power cord connection procedures at a glance
Power supply
model
Available power source
Connection procedure reference
Fixed power supply
AC power source
Connecting the AC power cord for the
fixed AC power supply
PSR360-56A/PSR72
0-56A/PSR1110-56A
AC power source
Connecting the power cord for a
PSR360-56A, PSR720-56A, or
PSR1110-56A power supply
PSR560-56D
–48 VDC power source in the
equipment room
Connecting the DC power cord for a
PSR560-56D power supply
RPS1600-A
Connecting the AC power cord for the fixed AC power supply
1.
Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded.
2.
Connect the female connector of the AC power cord to the AC-input power receptacle on the
switch. See
3.
Use a cable tie to secure the power cord to the handle near the AC-input power receptacle. See
4.
Connect the other end of the power cord to an AC power source.
Figure2-34 Connecting the AC power cord for the fixed AC power supply (1)
