2-12
Switch models
Installation
method
Mounting
bracket type
Description
Installation
procedure
shown in
Figure2-3
or port side.
•
Install the rear
mounting brackets
based on the rack
depth (distance
between the front
and rear rack
posts).
If the rack
depth is in the
range of 429 to
595 mm (16.89
to 23.43 in),
orient the rear
mounting
brackets with
the wide flange
inside the rack.
If the rack
depth is in the
range of 274 to
440 mm (10.79
to 17.32 in)
and the
distance from
the rear rack
posts to the
inner surface
of the cabinet
door is greater
than 153 mm
(6.02 in), orient
the rear
mounting
brackets with
the wide flange
outside the
rack.
•
If you are to install
a PSR1110-56A
power supply,
make sure the
rack depth is
larger than 600
mm (23.62 in).
