8
The cable management brackets use the same procedure for installation at the left side and right
side of the front panel. The following procedure installs a cable management bracket at the left side.
To install a cable management bracket:
1.
Identify the installation position for the cable management bracket on the mounting bracket.
The
LA
,
LB
,
RA
, and
RB
marks on the mounting brackets indicate the types of cable
management brackets to be installed.
2.
Orient the cable management bracket, with the lettering facing upward, and then position the
cable management bracket near its installation position on the mounting bracket.
3.
Align the captive screws on the cable management bracket with the holes in the mounting
bracket.
4.
Fasten the captive screws to secure the cable management bracket to the mounting bracket.
As a best practice, use a torque of 5 kgf-cm (0.49 Nm) to fasten the captive screws.
Figure 3-2 Installing a cable management bracket
