20
Installing the power module
Table 7 Install the power module
Procedure Description
Install a power
module
Hold the handle of the power module and place
the module to the installation position of the
chassis, and then push the module until the rear
end of the module touches the chassis.
Lock the
module
Fix the captive screws on the panel to secure
the power module to the chassis.
Removing the power module
Table 8 Remove the power module
Procedure Description
Release the screws
Release the captive screws on the panel.
Release the module
Pull the handle to detach the module
from the connector.
Pull out the module
Hold the handle to pull the module out.
(Do not touch the module’s surface
because it might be quite hot.)
WARNING!
The power module is hot swappable. However, before plugging
out a module, make sure that the load will not exceed the total
8-line output power when one module is installed.
