16
Field Description
have failed).
•
UP
—Both the administrative state and the physical state of the
VLAN-interface are up.
Line protocol current state
Link layer protocol state of a VLAN-interface:
•
DOWN
—The protocol state of the VLAN-interface is down.
•
UP
—The protocol state of the VLAN-interface is up.
Description
Description string of a VLAN-interface.
The Maximum Transmit Unit
MTU of a VLAN-interface.
Internet protocol processing :
disabled
The interface is not capable of processing IP packets. This
information is displayed when the interface is not configured with an
IP address.
Internet Address is 192.168.1.54/24
Primary
The primary IP address of the interface is 192.168.1.54/24. This
information is displayed only if the primary IP address is configured
for the interface.
Internet Address is 6.4.4.4/24 Sub
The secondary IP address of the interface is 6.4.4.4/24. This
information is displayed only if a secondary IP address is configured
for the interface.
IP Packet Frame Type
IPv4 outgoing frame format.
Hardware address
MAC address corresponding to a VLAN-interface.
IPv6 Packet Frame Type
IPv6 outgoing frame format.
Last clearing of counters
Time when the
reset counters interface vlan-interface
command
was last used to clear the interface statistics.
Never
indicates the
reset counters interface vlan-interface
command has never been used on the interface after the device's
startup.
Last 300 seconds input: 0 bytes/sec
0 packets/sec
Average rate of input packets in the last 300 seconds (in bps and
pps).
Last 300 seconds output: 0
bytes/sec 0 packets/sec
Average rate of output packets in the last 300 seconds (in bps and
pps).
0 packets input, 0 bytes, 0 drops
Total number and size (in bytes) of the received packets of the
interface and the number of the dropped packets.
0 packets output, 0 bytes, 0 drops
Total number and size (in bytes) of the sent packets of the interface
and the number of the dropped packets.
The brief information of interface(s)
under route mode
Brief information about Layer 3 interfaces.
Link: ADM - administratively down;
Stby - standby
Link layer state of an interface:
•
ADM
—The interface has been administratively shut down. To
recover its physical state, perform the
undo shutdown
command.
•
Stby
—The interface is operating as a standby interface. To see
the main interface, use the
display standby state
command.
Protocol: (s) - spoofing
If the network layer protocol state of an interface is shown as UP, but
its link is an on-demand link or not present at all, its protocol attribute
includes the spoofing flag (an s in parentheses).
Interface
Abbreviated interface name.
Link
Physical link state of the interface:
•
UP
—The link is up.
•
ADM
—The link has been administratively shut down. To
