background image

 

23 

Use 

undo shutdown 

to cancel the action of shutting down a VLAN-interface. 

Syntax 

shutdown 

undo shutdown 

Default 

A VLAN-interface is not manually shut down. The VLAN-interface is up if one or more ports in the 
VLAN is up, and goes down if all ports in the VLAN go down. 

Views 

VLAN-interface view 

Default command level 

2: System level 

Usage guidelines 

A VLAN-interface shut down with the 

shutdown

 command is in DOWN (Administratively) state until 

you bring it up, regardless of how the state of the ports in the VLAN changes. 

Before configuring parameters for a VLAN-interface, shut down the VLAN-interface with the 

shutdown

 command to prevent the configurations from affecting the network. Use the 

undo 

shutdown 

command to bring up a VLAN-interface after you have configured related parameters and 

protocols for the VLAN-interface. 

You can shut down a failed interface with the 

shutdown 

command and then bring it up with the 

undo 

shutdown

 command to see if it recovers. 

In a VLAN, the state of any Ethernet port is independent of the state of the VLAN-interface.  

Examples 

# Shut down VLAN-interface 2, and then cancel the action of shutting it down. 

<Sysname> system-view 

[Sysname] interface vlan-interface 2 

[Sysname-Vlan-interface2] shutdown 

[Sysname-Vlan-interface2] undo shutdown 

vlan 

Use 

vlan vlan-id 

to create a VLAN and enter its view or enter the view of an existing VLAN.  

Use 

vlan

 

vlan-id1 to vlan-id2 

to create VLANs 

vlan-id1

 through 

vlan-id2

, except reserved VLANs. 

Use 

vlan all

 to create VLANs 1 through 4094.  

Use 

undo vlan 

to remove the specified VLANs. 

Syntax 

vlan

 { 

vlan-id1 

[

 to vlan-id2 

]

 

|

 all

 } 

undo vlan 

vlan-id1 

[

 to vlan-id2 

]

 

|

 all

 } 

Default 

Only the default VLAN (VLAN 1) exists in the system.  

Views 

System view 

Содержание MSR Series







































































































































































Отзывы: