107
Parameters
interface-number
: Specifies a Layer 3 aggregate interface by its number in the range of 1 to 16.
interface-number.subnumber
: Specifies a subinterface of a Layer 3 aggregate interface. The
interface-number
argument specifies the main interface number. The
subnumber
argument specifies
the subinterface number and is separated from the main interface number by a dot (.). The value
range for the
subnumber
argument is 1 to 4094.
Usage guidelines
When you create a Layer 3 aggregate interface, a Layer 3 aggregation group with the same number
is automatically created. Removing the Layer 3 aggregate interface also removes the Layer 3
aggregation group. At the same time, the member ports of the aggregation group, if any, leave the
aggregation group.
Removing a Layer 3 aggregate subinterface does not affect the state of the main interface and the
corresponding aggregation group.
Examples
# Create Layer 3 aggregate interface Route-Aggregation 1 and enter its view.
<Sysname> system-view
[Sysname] interface route-aggregation 1
[Sysname-Route-Aggregation1]
lacp period short
Use
lacp period short
to set the LACP timeout interval on a port to the short timeout interval (1
second).
Use
undo lacp period
to restore the default setting.
Syntax
lacp period short
undo lacp period
Default
The LACP timeout interval is the long timeout interval (30 seconds).
Views
Ethernet interface view
Default command level
2: System level
Examples
# Set the LACP timeout interval on Ethernet 1/1 to the short timeout interval (1 second).
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] lacp period short
lacp system-priority
Use
lacp
system
-
priority
to set the LACP priority of the local system.
Use
undo
lacp
system-priority
to restore the default setting.