39
Command line interface
The command line interface of MSR 50 Routers provides plenty of configuration commands. They are
divided in system view into multiple groups, each associated to a view. The user can use these commands
to switch between different configuration views. In general, only certain commands can be executed
under a particular view. But some common commands (such as
ping
and
display current-configuration
)
can be executed in all views.
Arranging Slots and Numbering Interfaces
Slot arrangement
The MSR 50 provides many types of interfaces, such as Console, AUX, Ethernet, serial
(synchronous/asynchronous), and asynchronous port. The following describes how these interfaces are
numbered.
Figure 35
Slot arrangement on the MSR 50-40
(1) Slot 0
(2) Slot 1
(3) Slot 2
(4) Slot 3
(5) Slot 4
(6) Slot 5
(7) Slot 6
(8) Slot 7
(9) Slot 8
Note that if an MPU-G2 is applied, its interfaces are on Slot 0.