35
Figure 32
Local configuration connection interface
Step2
Set serial interface parameters. As shown in
Figure 33
, in the properties dialog box of the serial interface,
set the baud rate to 9600, data bit to 8, no parity check, stop bit to 1, and flow control to none. Then,
click
OK
to return to the
HyperTerminal
window.
Figure 33
Set serial interface parameters
Step3
Set HyperTerminal properties. Select
File
>
Properties
>
Settings
to enter the
aaa Properties
window as
shown in the following figure. Select the terminal emulation type to be VT100 or Auto detect, and click
OK
to return to the
HyperTerminal
window.