manualshive.com logo in svg

H3C MSR 20 Series, Руководство пользователя, Страница: 75 / 149

Поделиться
Скачать
H3C MSR 20 Series Скачать руководство пользователя страница 75

Interface Card and Interface Module Manual 
H3C MSR 20/30/50 Series Routers 

Chapter 2  Smart Interface Cards

2-47

mode. In the upstream direction, the SIC-1BSV/SIC-2BSV card can be connected to a 
user interface on an ISDN switch to receive and decompress, compress and transmit 
ISDN BRI digital voice traffic. In the downstream direction, the card can be connected 
to a TE device to forward the voice packets from the TE device to the Internet through a 
WAN interface on the router, thus implementing VoIP. The card has the following 
features.  

z

A BSV interface supports two modes: user and network, respectively for 
connecting an ISDN network and a TE device.  

z

When a BSV interface works in network mode, traffic is processed as follows: The 
digital voice traffic received on the BSV interface is compressed and forwarded 
through the CPU on the main control board to a WAN interface. The IP voice traffic 
received on a WAN interface is forwarded through the CPU on the main control 
board to SIC-1BSV/SIC-2BSV, where the traffic is decompressed and sent to the 
TE device. 

z

When a BSV interface works in user mode, traffic is processed as follows: The 
digital voice traffic received from the B channels on the BSV interface is 
decompressed and forwarded through the CPU on the main control board to a 
local FXS or FXO analog voice interface. The voice signals received on the local 
FXS or FXO analog voice interface are processed by VoIP and forwarded through 
the CPU on the main control board to SIC-1BSV/SIC-2BSV, where the traffic is 
compressed and sent out of the BSV interface to the ISDN switch. 

z

Working in conjunction with the FXS or FXO analog voice interface modules, 
SIC-1BSV/SIC-2BSV provides flexibility in voice call routing. 

z

The ISDN BRI D channel signaling is processed separately on CPU. 

z

A BSV interface supports remote power supply and thus can be connected directly 
to an ISDN phone, saving extra power supply device.  

z

The SIC-1BSV/SIC-2BSV card is dedicated to voice applications, which is 
different from the BS interface cards where BRI data applications are supported. 

2.14.2  Interface Attributes 

Table 2-31 

Interface attributes of SIC-1BSV/SIC-2BSV 

Attribute

SIC-1BSV

SIC-2BSV

Connector RJ45 

Number of connectors 

1 

2 

Interface standard 

ITU-T I.430, Q.921, Q.931 

Interface rate 

192 Kbps 

Cable 

ISDN S interface cable 

Supported service 

Voice access over ISDN S interface cable  

Содержание MSR 20 Series






















































































































































Отзывы:

Нет отзывов