H3C MSR 20-20, Справочник по командам

Страница: 295 / 2742

295
display atm map-info
Syntax
display atm map-info [ interface interface-type interface-number [ pvc { pvc-name
[ vpi/vci ] | vpi/vci } ] ]
View Any view
Parameter interface-type interface-number : Specifies an interface by its type and number.
pvc-name : PVC name, a unique string of 1 to 16 characters on ATM interface, not
case-sensitive. The name cannot be the same as a valid VPI/VCI value pair. For
example, the name 1/20 is not allowed.
vpi/vci : VPI/VCI pair. VPI is short for virtual path identifier; its value ranges from 0
to 255. VCI is short for virtual channel identifier; its value range varies by interface
type. Normally, VCI values from 0 to 31 are reserved for special purpose, you are
not recommended to use them. For details regarding the value range, refer to
Table 28.
Description Use the
display atm map-info
command to view the map information on an
ATM interface.
Note that:
■
Without an interface specified, the system displays the map information for all
ATM interfaces.
■
Without specifying the PVC name or the VPI/VCI value pair, the system displays
the map information of all PVCs on the specified ATM interface.
Example # Display map information for all ATM interfaces.
<Sysname> display atm map-info
Atm1/0, PVC 1/32, PPP, Virtual-Template10, UP
Atm1/0, PVC 1/33, IP & Mask, State UP
100.11.1.1, mask 255.255.0.0, vlink 1
Atm1/0, PVC 2/101, ETH, Virtual-Ethernet1, UP
PVCs Number of PVCs configured on the
interface
MAPs Number of maps on the interface
input pkts: 0, input bytes: 0, input pkt errors: 0 Received packets, bytes, and errors
output pkts: 69, output bytes: 2218, output pkt
errors: 8 Transmitted packets, bytes, and errors
Table 24 Description on the fields of the display atm interface command
Field Description
Table 25 Description on the fields of the display atm map-info command
Field Description
Atm1/0 Interface number
PVC 1/33 PVC identifier