H3C MSR 20-20, Справочник по командам

Страница: 1870 / 2742

1870 C
HAPTER
124: DAR C
ONFIGURATION
C
OMMANDS
if-match protocol
Syntax
if-match [ not ] protocol protocol-name
undo if-match [ not ] protocol protocol-name
View Class view
Parameters not: Specifies the current rule to not to match the specified matching rule.
protocol-name : Name of matching protocols, in the range bgp , bittorrent , citrix ,
cuseeme , dhcp , dns , edonkey , egp, eigrp, exchange , fasttrack , finger , ftp ,
gnutella , gopher , gre, h323 , icmp , igmp , imap , ip, ipinip , ipsec , ipv6, irc ,
kerberos , l2tp , ldap , mgcp , napster , netbios , netshow , nfs , nntp , notes ,
novadign , ntp , pcanywhere , pop3 , pptp , printer , rcmd , rip , rsvp , rtcp , rtsp ,
secure-ftp , secure-http , secure-imap , secure-irc , secure-ldap , secure-nntp ,
secure-pop3 , secure-telnet , sip , skinny , smtp , snmp , socks , sqlnet ,
sqlserver , ssh , streamwork , sunrpc , syslog , telnet , tftp , vdolive , winmx ,
xwindows , unknown-tcp , unknown-udp , unknown-others ,
user-defined01 , user-defined02 , ..., user-defined10 ( the new names will apply
if the protocols user-defined01 to user-defined10 are renamed), in which
unknown-tcp indicates the irrecognizable TCP packet, unknown-udp indicates
the irrecognizable UDP packet, and unknown-others indicates other
irrecognizable IP packets. The user-defined01 , user-defined02 , ...,
user-defined10 are user-defined protocol packets, whose port numbers are
invalid before the dar protocol command is executed.
Description Use the if-match protocol command to define protocol matching rules.
Use the
undo if-match protocol
command to delete the rules.
By default, no matching rule is configured.
Examples # Define smtp-class and configure the matching rule to match the SMTP protocol.
<Sysname> system-view
[Sysname] traffic classifier smtp-class
[Sysname-classifier-smtp-class] if-match protocol smtp
Packet Count Packet number
Byte Count Byte number
Bit Rate in 5 min(bps) Bit rate within 5 minutes, in bps
Max Bit Rate in 5 min(bps) Maximum bit rate within 5 minutes, in bps
Table 497 Description on the fields of the display dar protocol-statistic command
Field Description