H3C H3C S7500E-X, Руководство по настройке

Страница: 52 / 290

39
Figure 8 Load sharing for multidevice link aggregation in an IRF fabric
To enable local-first load sharing for link aggregation:
Step Command Remarks
1.
Enter system view.
system-view
N/A
2.
Enable local-first load
sharing for link aggregation.
link-aggregation load-sharing
mode
local-first
By default, local-first load sharing
for link aggregation is enabled.
Enabling link-aggregation traffic redirection
Link-aggregation traffic redirection prevents traffic interruption.
When you restart a card that contains Selected ports, this feature redirects traffic of the card to other
cards. (In standalone mode.)
When you restart an IRF member device or its card that contains Selected ports, this feature
redirects traffic of the IRF member device or card to other IRF member devices or other cards. (In
IRF mode.)
Configuration restrictions and guidelines
When you enable link-aggregation traffic redirection, follow these restrictions and guidelines:
•
Link-aggregation traffic redirection applies only to dynamic link aggregation groups.
•
To prevent traffic interruption, enable link-aggregation traffic redirection on devices at both ends
of the aggregate link.
•
To prevent packet loss that might occur at a reboot, do not enable spanning tree together with
link-aggregation traffic redirection.
•
Link-aggregation traffic redirection does not operate correctly on an edge aggregate interface.
Any Selected ports on the
ingress device?
Local-first load sharing
mechanism enabled?
Yes No
Yes
No
The egress port for a traffic flow is an
aggregate interface that has Selected
ports on different IRF member devices
Packets are load-shared only
across the Selected ports on the
ingress device
Packets are load-shared across
all Selected ports