H3C H3C S7500E-X, Руководство по настройке

Страница: 248 / 290

235
Step Command Remarks
1.
Enter system view.
system-view
N/A
2.
Create an Ethernet frame
header
ACL or an IPv4
advanced ACL and enter
ACL view.
acl number acl-number
[
name
acl-name
] [
match-order
{
auto
|
config
} ]
An Ethernet frame header ACL
number is in the range of 4000 to
4999. An IPv4 advanced ACL
number is in the range of 3000 to
3999.
DCBX Rev 1.00 supports only
Ethernet frame header ACLs.
DCBX Rev 1.01 and IEEE Std
802.1Qaz-2011 support both
Ethernet frame header ACLs and
IPv4 advanced ACLs.
3.
Create a rule for the ACL.
•
For the Ethernet frame
header ACL:
rule
[
rule-id
]
permit type
protocol-type ffff
•
For the IPv4 advanced ACL:
rule
[
rule-id
]
permit
{
tcp
|
udp
}
destination-port eq
port
Create rules according to the type
of the ACL previously created.
4.
Return to system view.
quit
N/A
5.
Create a class, specify the
operator of the class as OR,
and enter class view.
traffic classifier classifier-name
operator or
N/A
6.
Use the specified ACL as the
match criterion of the class.
if-match acl acl-numbe
r N/A
7.
Return to system view.
quit
N/A
8.
Create a traffic behavior and
enter traffic behavior view.
traffic behavior behavior-name
N/A
9.
Configure the behavior to
mark packets with an 802.1p
priority.
remark dot1p 8021p
N/A
10.
Return to system view.
quit
N/A
11.
Create a QoS policy and
enter QoS policy view.
qos policy policy-name
N/A
12.
Associate the class with the
traffic behavior in the QoS
policy, and apply the
association to DCBX.
classifier classifier-name
behavior behavior-name mode
dcbx
N/A
13.
Return to system view.
quit
N/A